• Handmade / Miscellaneous
  • 0
  • English English Russian Русский

How to make a Christmas tree from costume jewelry with your own hands

Christmas tree made from imitation jewelry

Today, we invite you to create a miniature Christmas tree made of imitation jewelry, which will always remind you of the most famous and wonderful holiday of the year. In addition, such an article will be a great gift to your friends and acquaintances.

You will need:

  • copper wire section 0,5 mm .;
  • 4-millimeter-green beads;
  • 4-millimeter pearl beads;
  • round pliers;
  • nippers;

Christmas tree made from imitation jewelry

Making the top of the tree

1. Measure and cut about 50 cm of copper wire and put on it 4 green beads and 1 pearl bead.
2. Take the wire from the side of the pearl bead, pass it through the green and tighten.
3. Fix the beads (just twist the wire one end around the other).
4. Put on 3 green beads and 1 pearl bead and repeat the process described above.
5. Make five branches with 3-i green beads and 1 pearly bead (alternating the ends of the wire), and then twist the remnants of the copper wire between each other.
6. A twig with 4 green beads is the top of your Christmas tree, and with 3 green - the top layer.

Christmas tree made from imitation jewelry

Make the middle layer of the Christmas tree

1. Measure and cut off 55 see copper wire and put 4 green beads on it and 1 pearl bead.
2. Continue to collect the branches as described above. Note: in this layer each twig should consist of 4-6 green beads and 1 pearl beads.
3. When you make 7-8 twigs, twist the remaining ends of the wire together.
4. Repeat all operations for the middle layer and make 3 pieces of blanks.

Christmas tree made from imitation jewelry

Make the bottom layer

1. Measure and cut off 55 see copper wire and put 10 green beads on it and 1 pearl bead.
2. Continue to collect the branches as described above. Note: in this lower layer, each twig must consist of 6-10 green beads and 1 pearly beads.
3. When you make 7-8 twigs, twist the remaining ends of the wire together.
4. Repeat all operations for the bottom layer and make 3 pieces of blanks.

Christmas tree made from imitation jewelry

Putting it all together

1. Connect the top layer to the middle layer, making a gap between the layers equal to about 1,5 cm. To join, simply align the ends of the copper wire and twist them together.
2. Following the same procedure, connect the bottom layer with the middle and upper.

Christmas tree made from imitation jewelry

Формируем ствол дерева

1. Measure from the bottom layer about 3 see and bend the copper wire at this point.
2. Wrap the remainder of the wire around the tree trunk.

Christmas tree made from imitation jewelry

Everything, your Christmas tree is ready!

Christmas tree made from imitation jewelry

Pleasant needlework!

See also:

avatar
css.php
GTranslate Your license is inactive or expired, please subscribe again!