How to make a stand for a laptop from a cardboard
If the outflow of hot air from the ventilation holes of the laptop is difficult, then this threatens the problem of overheating this device. Today's project will try to solve this problem in a very budgetary version. To solve the problem of overheating of the laptop will help a special cardboard stand that lifts the laptop above the working surface and allows air to circulate better. To make such a stand for a laptop made of cardboard, which will reduce the temperature by 10-15 degrees, you can only 1 an hour.
You will need:
- a cardboard box (a sheet of flat cardboard should be in 1,5-2 times the cover of the laptop;
Print an 1 scale: 1 with the following template, along which you will mark the cardboard (download template).
Cut the received sketches, put them on the cardboard sheet, and make the markup.
Gently with large scissors or a paper knife, cut out the details of the stand from the cardboard, following the marking lines.
Assemble the stand - it should be quite high. If necessary, treat the edges with a fine-grained sandpaper.
That's all! Stand for a laptop made of cardboard is ready. Of course, the strength of such a stand is in question. It is unlikely to survive one summer season, but its cost is very low, and it can be done in one hour.